• Home
• Contact
• Parameters
• Applications
  • Success Stories
  • Airports
    • QuickTOC
    • QuickCOD
  • Beverage
    • QuickCOD
    • QuickTOC
  • Brewing/Spirits
    • QuickCOD
    • QuickTOC
  • Chemical
    • QuickTOC
    • QuickCOD
  • Cogeneration
    • QuickTOC Loop
  • Dairy
    • BOD Biomonitor
    • QuickTOC
    • QuickCOD
  • Engineering
    • Architect
    • Design
    • Consulting
  • Food Processing
    • BOD Biomonitor
    • QuickTOC
    • QuickCOD
  • Municipalities
    • Drinking Water
      • QuickTOC
      • QuickTOC LOOP
    • WWTP
      • Respirometers
        • Strathtox
        • AS Bioscope
      • QuickCOD Elox
      • QuickTOC
      • BOD Biomonitor
  • Paper and Pulp
    • QuickTOC
    • QuickCOD
    • BOD Biomonitor
  • Petro Chemical
    • QuickTOC
    • QuickCOD
  • Petroleum Refining
    • QuickTOC
    • QuickCOD
  • Pharmaceutical
    • QuickTOC Loop
    • QuickTOC Purity
  • References
• Customer Service
• Links
  • Careers
  • Definitions
  • Site Links
• FAQ

CONDUCTIVITY

Brochure Link (See pages 8 and 9)

Contacting Line

Our range of conductivity probes was specifically designed for industrial applications with our measuring instruments. The various available models allow to cover a very wide range of measurements. Probe versions available with temperature sensor, particular versions with graphite or platinum electrodes, PTFE cell bodies with IP67 connectors. The conductivity measurement is carried out by immersing two metal electrodes into the solution to be measured. The current passing between the two electrodes allows the electrical resistance of the liquid, and therefore its conductivity. NB. All models are guaranteed for a maximum pressure of 6 Bar.

 

Range

• 0÷20 μS; 0÷200 μS; 0÷2.000 μS; 0÷20.000 μS; 0÷200.000 μS

• Resolution 0,01 μS; 0,1 μS; 1 μS; 10 μS

 

Avaiable versions with double parameter:

 

• 4238-22[pH/ORP - Conductivity]
• 4293-22[Chlorine - Conductivity]

________________________________________________________

Electrodeless

 

The S410/IND Series of Electrodeless conductivity sensors have been developed and engineered to produce a very low cost sensor, without sacrificing performance or quality. This has been achieved by injection moulding the sensor in glass loaded polypropylene. The sensor provides all of the benefits that the method of Electrodeless conductivity measurement provides. It is extremely tolerant of coating on the sensor, probably the greatest problem with conventional conductivity measurement. The S410/IND incorporates temperature compensation and can be mounted online, in a tank wall or large bore pipe or in an open tank using a range of adapters.

 

Range

• 0÷1.000 μS; 0÷10.000 μS; 0÷100.000 μS; 0÷1 Simens (0÷999,999mS)

• Resolution 1 μS; 10 μS; 100 μS; 1.000 μS

 

Avaiable versions with double parameter:

 

• 4238-23[pH/ORP - Inductive]
• 4293-23[Chlorine - Inductive]

 

Advantages

 

• Low Cost
• Low Maintenance
• Online, Dip and Tank Mounting Options
• Ideal for Cooling Tower Bleed, Rinse Water & Solution Concentration Applications